AQUAPOL: Emergency Repair
Aquapol: Instant Waterproof Coating for Roofs
AQUAPOL ROOF compound is a single application fibre-reinforced all weather acrylic coating that provides a tough yet flexible seamless membrane for the long term protection of industrial & domestic roofs. It can even be applied in damp weather conditions where it will resist water wash-off and cures to produce a water impermeable membrane. An immediate, effective economical solution for the remedial repair of roofs.
Suitable for use on concrete, fibre/cement, metal, felt, mastic, asphalt and existing bituminous coatings, leadwork, slates, tiles & brickwork. waterproofs gutters (plastic & metal), rigid pvc, downpipes, gulleys, flashing, vents, corrugated iron, copper and zinc.

Immediate Waterproofing
Brush Applied
One Coat Application
No Primer Required
For Wet or Dry Surfaces

1. Clean


Specs
Preparation
As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating.
Ensure surfaces are structurally sound, clean, free from dust, loose debris, algae and any contaminants and free from standing water.
Repair all cracks, splits & grazed areas. Fill holes and imperfections with Eagle’s Bitumen Mastic.
Stick down loose felt with Eagle’s felt adhesive. Blisters in felt must be cut, dried, re-bonded and sealed.
Do not use on XPS or pvc foil or in areas where subsequent solvent or oil contact is likely.
Application
Ensure product is stirred thoroughly
before use.
Apply by brush straight from container in a single uniform application rate of 1-2 kg per m2.
In extreme cases a second coat may be applied 2-3 days after initial application.